Economical 2 Color Mini Flexo Printing Machine for Plastic Bag Print
- Voltage
- 380V
- Max film width
- 600
- Suitable material
- Paper, PP, PET, PE, PVC, Non-woven Fabric
- Speed
- 50-80m/min
Economical 2 Color Mini Flexo Printing Machine for Plastic Bag Print
Performance and Characteristics:
1. Easy operation, flexible starting, accurate color register.
2. The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. The printing cylinder lift and lower, is will stir the printing ink automatically after lifting.
4. The printing ink is spread by the knurled cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Inching/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
Machine Main Parameter
|
Model |
2600 |
2800 |
21000 |
|
Machine Colors |
2Color |
||
|
Max. printing material width |
650mm |
850mm |
1050mm |
|
Max. printing width |
560mm |
760mm |
960mm |
|
Max. Printing length(repeat) |
7.5"~40"(190mm~1000mm) |
||
|
Max. Mechanical speed |
80m/min |
||
|
Max. Printing speed |
50m/min |
||
|
Register Precision |
Crosswise: ±0.25mm; Lengthwise: ±0.25mm (Register precision no change during this machine speed up or down) |
||
|
Thickness of Plate |
Photopolymer plate 2.28mm |
||
|
1 Set of Printing Cylinder on this machine |
400mm |
||
|
Total machine power |
8kw |
10kw |
12kw |
|
Power |
Voltage 380V, 3 PH, 50 Hz |
||
Machine detailed configuration
Single Unwind Unit：
|
Max. Length of Roller |
650mm |
850mm |
1050mm |
|
Max. unwind diameter |
Φ800mm |
||
|
Unwind Magnetism device |
5 Kg |
||
|
Tension precision |
±0.3kg |
||
|
Unwind web cylinder |
Φ76mm (inner diameter) |
||
Traction Unit:
|
Constitution of Traction |
Aluminum roller, Chrome plated roller |
|
Traction Zones |
2 Zones, unwind and rewind part |
|
Bearing |
NSK (Japan) |
|
One direction bearing |
ASNU (Germany) |
Printing Unit:
|
Type |
Stack Type |
|
Machine Colors |
2 Color |
|
Principle of Work |
Gears Drive |
|
Suitable Ink |
Water-based ink or Oil-based ink |
|
Printing Plate |
Resin or Rubber |
|
Constitution of Printing |
Anilox roller, Rubber roller, Chrome plated roller, Printing cylinder, Resin version |
|
Anilox roller |
Steel anilox roller 2pcs (300LPI) |
|
Rubber roller (Ink transfer) |
1 Set (2 pcs) |
|
Printing Pressure |
Mechanical adjust |
|
Adjusting of Register |
By Manual (Automatic printing after beforehand overprint. When start machine, no need register color again.) |
Heating and Drying Unit:
|
Dryer on each color |
Electrical heat drying |
|
Blower |
50w X2pcs |
|
Blower of nature wind |
1kw x 2pcs |
|
Electrical drying power |
3 kw (it is special with double surface blowing ,wind cooling circulate, drying fast, also with high speed drying for fastness) |
Electrical Parts:
|
Master motor |
2.5Kw |
|
Inking distributing motor |
750W |
|
The inverter |
2.8KW , China |
|
Auto tension control |
Auto tension control when machine stop; Auto stop machine when material is cut off |
|
Electronic control system |
Operation control panel 1pcs |
Rewind Unit:
|
Max. material diameter |
800mm |
|
Max. Rewind Diameter |
Φ800mm |
|
Rewind Magnetism device |
10Kg |
|
Tension sensor |
2-30Kg |
|
Rewind motor |
1Kw |
|
Rewind web cylinder |
Φ76mm (inner diameter) |
Main Purchased part
|
Contactor |
CHINT |
|
Breaker |
CHINT |
|
Counter |
CHINT |
|
Revolve Button Switch |
Schneider |
|
Urgent Stop Switch |
Schneider |
|
Mini Relay |
CHINT |
|
Frequency Conversion Controller |
CHINA |
|
Button Switch |
Schneider |
|
Temperature Meter |
Schneider |
|
Electric-thermal Couple |
CHINA |
|
Hint Light |
Schneider |
|
Automatic Tension Control |
CHINA |
|
Main Motor |
CHINA |
|
Edge Position Controller |
CHINA CHONGQING |
1 Set of Toolbox :
|
01 |
Inner hexagonal spanner |
1 SET |
|
02 |
Phillip screwdriver |
1 PC |
|
03 |
Slotted screwdriver |
1PC |
|
04 |
Screw |
15 PC |
|
05 |
Scissors |
1PC |
|
06 |
Operating manual |
1 PCS |
